BURKERT直動式6012型柱塞閥授權總代理

德國BURKERT寶德6012型 - 柱塞閥3/2路直動式

Produkt-Foto Typ 6012

產品的描述可能與實際的具體設計不同。

Produkt-Foto Typ 6012

德國寶德BURKERT直動式電磁閥類型說明

密封和柱塞導管焊接在一起，以增強耐壓性和密封性。根據應用，可提供各種密封材料組合。 Bürkert*的法蘭設計（SFB）可實現空間與班卓螺栓的班卓琴連接是輕松直接安裝在氣動驅動器上的理想解決方案。帶有班卓螺栓的班卓琴連接是易于直接安裝在氣動驅動裝置上的理想解決方案。結合符合DIN EN 17301-803表B或C的插頭，閥門滿足防護等級IP65。

直動式緊湊型小型閥，直徑DN 1.6

螺紋線圈系統

Banjo螺紋連接，可直接安裝在氣動閥上

簡單快速的推入式，法蘭式或歧管式安裝

服務友好的手動覆蓋

如需選擇正確的產品，請參閱技術數據，圖像和注釋，以便根據數據表正確使用。

BURKERT直動式6012型柱塞閥授權總代理

Type 6012 - Plunger valve 3/2 way direct-acting

PrintShare

Link was copied

The depiction of the products may differ from the actual specific design.

Show articles

Type Description

Valve 6012 is a direct-acting plunger valve. The stopper and plunger guide tube are welded together to enhance pressure resistance and leak-tightness. Various seal material combinations are available depending on the application. A Bürkert-specific flange design (SFB) enables space-saving arrangement of valves on a manifold. Push-in fittings can be selected for flexible hose connection. A banjo connection with banjo bolt is the ideal solution for easy direct mounting on a pneumatic drive. Optional manual actuation enables quick commissioning and optimal maintenance. In combination with a plug in accordance with DIN EN 17301-803 Form B or C, the valves satisfy protection class IP65.

• Direct-acting, compact small-format valve with diameter of up to DN 1.6
• Screwed coil system
• Banjo threaded connection for direct mounting on pneumatic valves
• Simple and quick push-in, flange, or manifold installation
• Service-friendly manual override

For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet.

BURKERT直動式6012型柱塞閥授權總代理